Part I - General
1.1 Scope
A. Furnish all materials, labor and equipment necessary to complete installation of traffic signs as shown on drawings and herein specified. Installation shall include all appropriate hardware.

1.2 Submittals
A. Manufacture's illustrated product literature and specifications.
B. Installation instructions.
C. Complete shop drawings.

1.3 Quality Assurance
A. Manufacturer to have a minimum of 5 years experience in manufacturing signage.
B. All signage to be manufactured by one manufacturer.

Part II - Products
2.1 Acceptable Manufacturer or Manufacturer's Representative
A. Sign International, Inc.
P.O. Box 20054
Beaumont, TX 77720-0054
Phone: (800)590-7446
Fax: (409)842-5659
SignInternational.com

2.2 Materials
A. .080 Aluminum
B. Engineer Grade Reflective Sheeting
C. Non Corrosive 3/8" Machine Bolts with washers (2) per sign.

2.3 Mounting Post
A. U-Channel
B. 2"x2" Square
C. 2 3/8" O.D. Round

Part III - Execution
3.1 Installation
A. Install traffic signs in accordance with manufacturer's written installation instructions and shop drawings.

3.2 Cleaning & Protection
A. Wash all surfaces clean following installation.

3.3 Warranty
A. Sign International's architectural signage systems carry a five year manufacturer's limited warranty.